NFS-Toolkit - NFS World support

NFS-Toolkit now supports NFS World.










Comments

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. :O
    Now THIS, is an ABSOLUTE dream come true! :D
    This is amazing! Nice work, nfsu360! Keep it up!

    ReplyDelete
  3. Now undercover left then relase oh hell yeah 😎😎😎

    ReplyDelete
  4. Hello, I work in a simulator called Assetto Corsa and I would like to use all the 3D models of the NFSC Canyons to convert them to this game and drift with friends and have a good time

    If you can, would you send me some obj files? My Facebook is:
    https://www.facebook.com/leandrobernal123

    ReplyDelete
    Replies
    1. i want to do it but exacly difrent having akina in carbon is my dreams

      Delete
  5. Toolkit seems to be very bery close to the release. AND I CANNOT WAIT FOR IT :D

    ReplyDelete
  6. EAGL 1.0
    NFS Hot Pursuit 2 = ? not seen
    NFS Underground = ? not seen

    EAGL 2.0
    NFS Underground 2 = ok

    EAGL 3.0
    NFS Most Wanted = Ok
    NFS Carbon = Ok
    NFS World = Ok

    EAGL 4.0
    NFS Prostreet = Ok
    NFS Undercover = ? not seen



    ReplyDelete
    Replies
    1. From what I saw somewhere, nfsu360 had screenshots of WIP support for NFS Undercover. I don't remember where I found them. It was probably on his Google Photos.

      Delete
    2. How can NFS World be among the NFS of the third version of the EAGL engine? NFS World came out two years later than NFS Undercover and three years later than NFS ProStreet, so it was made on the fourth version of the engine or am I wrong?

      Delete
    3. NFS World was made with the EAGL 3 engine base, however, the final product utilizes a sort of subvariant of EAGL3 that's essentially developed from EAGL3 but isn't EAGL3. Technically though - EAGL3.

      Delete
  7. i hope you could repear WIP streets in nfs world map >__<

    ReplyDelete
  8. OMG , amazing hard job. How can you download this tool?

    ReplyDelete
    Replies
    1. ToolKit being developed. possible release will be in 2018

      Delete
    2. This comment has been removed by the author.

      Delete
  9. Well, very well done job! Hope you will get some more progress as well. Take a time to it. Better to make a good product on long time, than a bad on short time. Good luck!

    ReplyDelete
  10. Matthew Saunders30 September 2018 at 16:46
    From what I saw somewhere, nfsu360 had screenshots of WIP support for NFS Undercover. I don't remember where I found them. It was probably on his Google Photos.

    link?

    ReplyDelete
    Replies
    1. I don't remember the link, unfortunately. If I find it, I'll give it to you.

      Delete
    2. I remember seeing pictures of experimental mesh mod of a tank on nfscars.net, but I can't find the post anywhere on the site anymore. it was years ago

      Delete
    3. https://photos.google.com/share/AF1QipOErVVvIhR4TOKT8ALHfPWayjO0XP5--qcKZaU2dzt7Br6hXP1rsGgEKe2RfL1grw?key=Mk81clFsWlhoQzlWMk9jN1lpRmdNaW1NeTZFTGN3

      Delete
  11. I made a Ford Fiesta ST for prostreet however the game is bugged, every time I finish a race the game either freezes or hard crashed. If we could get support for Undercover I'd be more than happy to port my mod from PS to UC. Keep up the amazing work nfsu360!

    ReplyDelete
  12. Hello! Do you know a tool to see the entire map or parts of it including texturing like in this editor?
    All I need is to see how the game is made (any NFS), how textures are used and how road is constructed.
    Please help me, im not the best at modding or ripping, if you know a technique or editor.

    ReplyDelete
    Replies
    1. They used splines to bend the road shapes. The map wasn't streamed. They've used LODs for performance. Or if they've streamed they've streamed entire blocks of map. It's mesh based. You can see it if you use the Extra settings mod's free camera. If you go far top down then you only see the LODS. That's why nobody ripped the map yet with 3D Ripper DX, or Ninja Ripper. It's useless.

      Delete
  13. I never played NFS World. Out of curiosity, can you drive from Rockport to Palmont directly in that game or do you have to "switch" between being only in one city or the other?

    ReplyDelete
    Replies
    1. It's a complete map. The citys connected by highways. So you can drive directly to another yes. :)

      Delete
  14. This comment has been removed by a blog administrator.

    ReplyDelete
  15. Replies
    1. The program is under development. All hope that the release will be this year.

      Delete
  16. Damn Making a Updated NFS World Connected City like Tri-City and Bayview

    ReplyDelete
  17. This comment has been removed by a blog administrator.

    ReplyDelete
  18. No news so far. Is there any chance for the release this year?

    ReplyDelete
  19. This comment has been removed by a blog administrator.

    ReplyDelete
  20. I hope the early version of the NFSToolkit will be released by the end of December/Silvester/31.12 .

    ReplyDelete
    Replies
    1. or end January 2019

      Delete
    2. probably next year, also keep in mind there is someone else working on a similar tool for nfs world too

      Delete
    3. who is this guy or what project?

      Delete
  21. Still dreaming of this tool so badly.. Imagine NFSU2 with 1000 of cars.. that would be hilarious.

    ReplyDelete
  22. No chance to release this year, lets hope it will be in 2019

    ReplyDelete
  23. I can not wait until when nfs world is released in 2019 at the beginning I think it depends on the user and I am waiting for this project with mw convert carbon map it was already with carbon now with mw and nfs world map style carbon and mw if possible at the beginning of this year convert maps rockport 1.0. from the city of palmont was the merry world and new ones

    ReplyDelete
  24. Come oon please nfsu360 give or show us something ^^. You set me on a hype train. So excited. Merry Christmas and a happy new year.

    ReplyDelete
  25. merry christmas a happy new year next year will be the same with this 2018 year NFS360
    good luck in the next projects

    and I am looking forward I can not wait for the next projects because that was previously shown videos are ok NExt project:
    -NFS MW convert carbon map Palmontcity version MW realesed this year
    -NFs world map convert carbon and Mw style

    ReplyDelete
  26. Hello. In early 2018 I contacted a staff that is maintaining an NFSW server here in Brazil. Then I asked them if there would be some kind of tool to edit the game map. Because I want to create a server with maps, races, cars and vinyl modified, as in GTA SAMP. They told me about you, but they already told me you hate the NFSW. But seeing this happen gives me some hope. I wonder if this tool will be available? And when? Anyway, I'd like to compliment you on your work and effort. Thank you very much.

    ReplyDelete
  27. This comment has been removed by the author.

    ReplyDelete
  28. Palmont 1.0 when?? it has now been more than an year

    ReplyDelete
  29. it was mentioned earlier even a video on youtube is so shifted probably I will bet that it will be January 2019 or later

    I feel that it may be a little later

    ReplyDelete
  30. where is the download link?

    ReplyDelete
  31. cara eu tenho conhecimentos de modelagem 3d com o blender , pretendo criar uma ponte entre canyon san juan e palmont city, tenho vontade de entrar em algum projeto

    ReplyDelete

Post a Comment

Comment moderation has been enabled due to spam. Your comment will be available soon. Thank you for your patience.

Popular posts from this blog

NFS-VltEd v4.5 Released